9 Aspects to improve the display effect of LED display screen
9 Aspects to improve the display effect of LED display screen
9 aspects to improve the display effect of LED display screen To provide a good LED display screen, consider the following key factors
- Resolution and pixel density.
- Brightness and contrast.
- Color accuracy and brightness.
- Refresh rate.
- Range of viewing angles.
- Environmental control.
- Display content optimization.
- Adjust and calibrate.
- Regular manintenance.
1- Resolution and pixel density:
Choose the LED screen resolution and suitable for your application needs. Higher resolution and pixel density can provide sharper and more delicate image and text display.
2- Brightness and contrast:
Ensure that LED display screen have sufficient brightness and contrast to ensure that images and content are clearly visible in a variety of environmental conditions. Adjust brightness and contrast Settings to suit different lighting conditions.
3- Color accuracy and brightness:
Choose LED display screen with high color accuracy and brightness. Ensure that the billboard can accurately reproduce the desired colors and has a wide color gamut to display rich color details.
4- Refresh rate:
Refresh Rate
A higher refresh rate provides smooth image and video display. Choose LED screen with a high enough refresh rate to avoid flickering or blurry images.
5- Range of viewing angles:
Choose LED screen with a wide range of viewing angles to ensure the viewer can get a clear image from different angles and locations.
6- Environmental control:
One of the most important 9 aspects to improve the display effect of LED display screen is Environmental control, Ensure that the environment around the led complies with optimal display conditions. Avoid direct sunlight, excessive backlighting or excessively dim environments to ensure clarity and visibility of the display effect.
7- Display content optimization:
Based on your display needs, optimize the design and layout of the display content. Make sure images, text, and other content fit into LED screen and have adequate contrast and clarity.
8- Adjust and calibrate:
Adjust and calibrate LED to optimize the display effect. This includes adjusting parameters such as brightness, contrast, and color balance and grayscale level to get the best display.
9- Regular maintenance:
Regular maintenance
Also, one of the most important9 aspects to improve the display effect of LED display screen is Regular maintenance, Perform regular maintenance and cleaning to ensure that the billboard surface is clean and dust-free, and keep the electronic components in good condition. You can contact EGYLED technical support team from here.
To sum up, excellent LED display screen effect can be provided by selecting LED Screens suitable for application requirements, adjusting display parameters, optimizing display content, and providing appropriate environmental control and maintenance.
Precautions for opening and closing the screen
1. Turn on the led screen: Before turning on the large screen of the LED display, turn on the control computer to make it work normally.
2. Avoid turning on the screen when the screen is completely white, because it has the largest current effect on the entire power distribution system at this point.
3. Turn off the led screen: first turn off the power of the LED display body, turn off the control software, and then power off properly; (Turn off first, if you don’t turn off the machine, the screen body will appear bright and light, the consequences will be serious)
4. The screen switching interval should be greater than 5 minutes.
Environmental considerations
- Working environment temperature range -20℃ -t≤50℃, 10%-90%RH;
- Avoid using or storing in high temperature, high humidity, and acid/alkaline/high salt environment
- Keep away from combustibles, gas, dust, etc.
- Avoid violent collisions during transportation and avoid violent collisions with objects.
- When the ambient temperature is too high or the heat dissipation performance is not good, care must be taken to avoid using the screen for a long time.
- After the LED display is in operation with humidity exceeding the set value, it will cause corrosion of components, or even short circuit, resulting in permanent damage.
- It is strictly forbidden for water, iron powder and other conductive metal materials to enter the screen. The LED display should be placed in a low-dust environment as far as possible. Large dust spots will affect the display effect, and too much dust will damage the circuit. If you enter the water for various reasons, please cut off the power immediately, so that all parts can be completely dry before entering the screen.
Electricity precautions
When we talk about (9 Aspects to improve the display effect of LED display screen) we should clarify the Electricity precautions.
1. The LED display module is DC +5V (working voltage: 4.2~5.2V), and the AC power supply is prohibited. It is strictly forbidden to connect the positive and negative poles of the power terminal (note: once the connection is reversed, the product will be burned or even cause a serious fire)
2. LED display power supply voltage: 220V ± 10% Frequency: 50HZ ± 5% frequency.
3. The grounding wire, the grounding wire and the neutral wire are reliably separated, and the grounding wire is kept at a certain distance from the grounding wire of high-power electrical equipment.
4. If there are any abnormalities such as electrical leakage, electric leakage, wire combustion, smoke, etc., the system should not be operated frequently and the problem should be detected in time.
5. Maintain the stability of the power supply, do a good job of grounding protection to prevent lightning strikes, do not use it under harsh natural conditions, especially in strong lightning weather.
6. The large led screen must be equipped with a phased power supply, because the maximum power state of the entire screen will affect the entire power distribution system.
7. The LED display screen should not run an all-white screen at the highest brightness for more than half an hour, so to avoid overcurrent, heating of the power supply, damage to the LED screen, and affect the service life of the display screen. It is mainly recommended to play dynamic video.
8. LED display products cannot be turned on or off continuously during use, and the interval between the two should be at least 1 minute.
9. Non-professionals are not allowed to touch the inner font of the large LED display screen, otherwise the font will be damaged, If there is any problem, please ask a professional to fix it.
Cleaning precautions
1. Regular cleaning and maintenance: Full color LED screens are exposed to outdoor environment for a long time, wind, sun, and rain. Even if indoor LED screens are used for a long time, more washing dust and rain marks will accumulate on the screen, so they should be cleaned regularly in time to avoid affecting the viewing effect.
2. If you want to clean the surface of the mold, brush it with a soft brush. It is strictly forbidden to clean the surface of the LED module with liquid, otherwise the LED screen beads may be damaged.
3. Accuracy rate: The surface of the large LED display screen can be measured with alcohol, or with a brush or straw. The wet cloth method cannot be used directly.
Moisture resistance and storage requirements
1. Storage temperature requirements: ambient temperature -40 ℃t≤60 ℃, after opening the package, store it under the conditions of temperature < 200 ℃. 30 ℃ and humidity < 30 ℃ 60%.
2. According to the environmental conditions of the display screen and the control part, avoid insect bites, and apply anti-rat drugs if necessary.
3. The LED display cannot be turned off for a long time. In a high-humidity environment, if the screen is not used for more than 3 days, the screen should be preheated every time the screen is turned on: 30%-50% brightness, preheat first 4-8 hours later, adjust to normal brightness (80%-100%), so as to exclude moisture, so that there is no abnormality during use.
If the screen is not used for more than 7 days, you need to use the lighting hotspot once: 30% – 50% brightness is heated for more than 12 hours, and then set to normal brightness (80%-100%) to light the screen, so as to remove moisture, so that there will be no abnormalities when used again.
While maintaining, 9 aspects to improve the display effect of LED display screen and taking into account the previous considerations, it will ensure that you improve the display of ads and preserve the internal and external LED screen.
At the end, you can see different forms at the highest level of development for the LED display screens through our website, from here.
